Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 文章瀏覽排名

一體化集成的智能柱上開關操作機構綜合故障診斷方法

來源:電工電氣發布時間:2019-07-16 14:16 瀏覽次數:705
一體化集成的智能柱上開關操作機構綜合故障診斷方法
 
席禹1,陳波1,朱昌勇2,朱發國2,張建琛3
(1 南方電網科學研究院有限責任公司,廣東 廣州 510080;2 航天科工深圳(集團)有限公司,廣東 深圳 518048;
3 廈門中高智能電器科學研究院有限公司,福建 廈門 361006)
 
    摘 要:配電網的開關設備大多數故障是由其操作機構故障引起的,通過在一體化集成的智能柱上開關上加裝傳感器,監測獲取操作機構的分、合閘線圈和儲能電機工作電流,結合環境溫濕度等特征信息的變化,提出了一種針對操作機構的多元信息狀態監測和故障診斷方法,通過對比同一操作機構的多次電流波紋變化,結合環境溫濕度的變化,預測操作機構的性能變化趨勢,綜合診斷操作機構的性能狀態,提前發現潛在的設備故障隱患,給出相對應的檢修意見,有助于全面了解開關設備的各項狀態指標,降低開關設備的故障率。
    關鍵詞:配電開關;操作機構;狀態監測;故障診斷
    中圖分類號:TM643     文獻標識碼:B     文章編號:1007-3175(2019)07-0037-05
 
Synthesized Fault Diagnosis Method of Integrated Column Switch Operating Mechanism
 
XI Yu1, CHEN Bo1, ZHU Chang-yong2, ZHU Fa-guo2, ZHANG Jian-chen3
(1 China Southern Power Grid Research Institute Co., Ltd, Guangzhou 510080, China;
2 Aerospace Science and Technology Shenzhen (Group) Co., Ltd, Shenzhen 518048, China;
3 Xiamen Zhonggao Intelligent Electrical Appliance Research Institute Co., Ltd, Xiamen 361006, China)
 
    Abstract: Most of the faults of switchgear in distribution network are caused by the faults of its operating mechanism. Via adding sensors on the integrated column switch to monitor the working current of making and breaking coil and energy-stored motor and combining with the changes of the environmental temperature and humidity etc feature information, this paper proposed a kind of multi-information state monitoring and fault diagnosis method for the operating mechanism. By comparing the multiple current ripple changes of the same operating mechanism and combining with changes in environmental temperature and humidity, this paper forecasted the trend of performance change of the operating mechanism, diagnosed the performance status of the operating mechanism comprehensively, so that the potential equipment failure hidden danger was found out in advance and the corresponding maintenance suggestions were given, which is helpful to understand the state indicators of the switchgear comprehensively, reducing the failure rate of the switchgear.
    Key words: distribution switch; operation mechanism; condition monitoring; fault diagnosis
 
參考文獻
[1] 徐國政,張節容,錢家驪. 高壓斷路器原理與應用[M]. 北京:清華大學出版社,2000.
[2] 苑舜. 高壓斷路器彈簧操作機構[M]. 北京:機械工業出版社,2000.
[3] 張永奎,趙智忠,馮旭,等. 基于分合閘線圈電流信號的高壓斷路器機械故障診斷[J]. 高壓電器,2013,49(2):37-42.
[4] 邱志斌,阮江軍,黃道春,等. 基于電機電流監測的高隔離開關機械故障診斷[J]. 中國電機工程學報,2017,35(13):3459-3466.
[5] 李大衛,徐黨國,孫云生,等. 基于分合閘線圈電流的斷路器缺陷診斷及試驗方法研究[J]. 高壓電器,2015,51(8):114-118.
[6] 王思源,韓琪,丁玉立,等. 溫度、濕度對中壓開關柜絕緣性能的影響及對策[C]// 全國電力系統配電技術協作網第二屆年會論文集,2013.
[7] 浙江省電力公司科技信息部. 隔離開關狀態評價導則:Q/GDW-11-109—2010[S]. 杭州:浙江省電力公司,2010:2-5.