Suzhou Electric Appliance Research Institute
期刊號: CN32-1800/TM| ISSN1007-3175

Article retrieval

文章檢索

首頁 >> 文章檢索 >> 文章瀏覽排名

一起斷路器防跳回路缺陷案例的分析及改進方法

來源:電工電氣發布時間:2021-04-30 13:30 瀏覽次數:726

一起斷路器防跳回路缺陷案例的分析及改進方法

高遠,劉懷宇,趙睿
(國網江蘇省電力有限公司檢修分公司,江蘇 南京 211100)

 

    摘 要:防跳回路在斷路器操作回路中意義重大,能有效防止斷路器發生“跳躍”對斷路器本身和電網造成的巨大沖擊。針對某新建變電站驗收時發現的防跳試驗后斷路器不能再次進行手動合閘的問題,闡述了斷路器本體機構防跳和操繼箱防跳兩種方式的原理,分析了該起斷路器防跳回路缺陷的原因,給出了一種在現場缺少多余防跳繼電器輔助接點情況下,消除防跳回路寄生回路的改進方法,現場試驗驗證了該方法的有效性。
    關鍵詞:斷路器;防跳回路;缺陷處理
    中圖分類號:TM561     文獻標識碼:B     文章編號:1007-3175(2021)04-0034-04
 
Analysis and Improvement Method for Leap-Preventive
Circuit Defect of Breaker
 
GAO Yuan, LIU Huai-yu, ZHAO Rui
(State Grid Jiangsu Electric Power Co., Ltd. Maintenance Branch Company, Nanjing 211100, China)
 
    Abstract: The leap-preventive circuit is of great significance in the operation circuit of breaker, and can effectively prevent the breaker from “leaping” which may cause a huge impact on the breaker itself and the power grid. According to the found problem during acceptance of a new substation that breaker cannot be manually closed again after leap-preventive test, this paper expounds the principles of leap-preventivecircuit in body mechanism and operating box, analyzes the cause of the leap-preventive circuit defect, and presents an improved method to eliminate the parasitic loop of leap-preventive circuit in the absence of auxiliary nodes of redundant leap-preventive relays. The effectiveness of the method is verified on site.
    Key words: breaker; leap-preventive circuit; defect handling
 
參考文獻
[1] 顏華敏,顧國平,陸敏安,等. 一起斷路器防跳回路異常分析及改造[J] . 電力系統保護與控制,2010,38(12) :138-140.
[2] 兀鵬越,董志成,陳琨,等. 高壓斷路器防跳回路的應用及問題探討[J] . 電力自動化設備,2010,30(10) :106-109.
[3] 陳剛,盧松城,紀青春.220 kV 斷路器防跳回路中異常問題分析及處理[J] . 電力系統保護與控制,2009,37(23) :185-186.
[4] 龍啟峰. 一起斷路器防跳回路異常的分析與改進[J]. 陜西電力,2015,43(5) :85-87.
[5] 王軼成,劉波. 斷路器防跳回路的經典接線及其應用[J]. 電力系統自動化,2001,25(1) :69-70.
[6] 劉永興. 斷路器操作回路中防跳繼電器靈敏度的選擇[J]. 電力系統保護與控制,2009,37(9) :116-119.
[7] 郭偉,楊東海.“防跳”回路的重疊與比較[J]. 繼電器,2007,35(15) :62-63.
[8] 李英成,柴龍慶,高振興,等.10 kV 斷路器防跳回路異常問題分析及處理[J] . 機電工程,2014,31(7) :942-944.