基于物聯網架構的校園電能監測系統設計
孫薇1,欽道理2,于鳳芹1
1 江南大學 物聯網工程學院,江蘇 無錫 214122;
2 無錫銳泰節能系統科學有限公司,江蘇 無錫 214135
摘 要:針對目前校園電能監測現狀,設計了一種基于物聯網架構的校園電能監測系統。介紹了校園電能監測系統的各功能模塊組成結構,并給出了后臺工程管理模塊的設計,即基于后臺工程化管理,通過設備建模、組織建模的方式來管理整個電能監測系統。系統支持多種終端設備的遠程訪問,在軟件設計和電能監測管理方面具有一定的先進性。
關鍵詞:物聯網架構;電能監測;設備建模
中圖分類號:TM764.1;TM933.4 文獻標識碼:A 文章編號:1007-3175(2013)12-0013-04
Design of Campus Power Monitoring System Based on Things Networking Architecture
SUN Wei1, QIN Dao-li2, YU Feng-qin1
1 School of Internet of Things Engineering, Jiangnan University, Wuxi 214122, China;
2 Wuxi Reatgreen Energy Saving System Science Co., Ltd, Wuxi 214135, China
Abstract: Aiming at present situation of campus power monitoring, this paper designed a kind of campus power monitoring system based on things networking architecture. Introduction was made to each functional module composition structure of campus power monitoring system, giving the design of background engineering management modules, which was based on background engineering management. The entire power monitoring system was managed by means of equipment and organization modeling. The system supports remote visit of multi-terminal equipment, there is certain advancement in software design and power monitoring management aspects.
Key words: things networking architecture; power monitoring; equipment modeling
參考文獻
[1] 熊瑋瑋,席自強,王莎,黃文聰.校園某實驗樓電能分項計量系統研究[J].湖北工業大學學報,2011,26(1):97-100.
[2] 陳志峰,賈海天,應俊.基于物聯網數據庫的校園電能管理系統設計與實現[J].中國教育信息化:高教職教,2012(1):34-36.
[3] 任春麗,唐求.電能質量遠程監測管理系統[J].儀表技術與傳感器,2011(3):44-45.
[4] 孫慶吉,張宏.基于GPRS的遠程電能計量系統設計[J].信息技術,2007,31(12):158-160.
[5] 王曉曼,于軍琪,高博超,呂齊.基于物聯網的建筑能耗管理研究[J].工業控制計算機,2011,24(4):45-46.
[6] 徐迪威,蔡建新.物聯網及其應用剖析[J].計算機工程與應用,2011,47(15):229-231.